A handy ‘how-to’ guide for our Titan 2 pump.

The Titan 2 is compact, can be neatly packed away and is very easy to set up. 
To use your Titan 2 pump, firstly take the handle from the side of the pump and thread it through the top and lay the feet flat on the ground. 
The pump hose has the same connection both ends, so either end is ok to attach to the pump. When attaching the hose, line up the grove on the end of the hose nozel with the 12 o&apos;clock position on the pump, push it in with a little force and lock it clock wise to be closed.
Make sure the exhaust lever is fully back towards you. As you start pumping, you will reach about 5-6 psi and you will feel air start to exhaust from the side of the pump. This is totally normal.
We recommend full strokes for maximum efficiency when pumping up your board! Once the pumping becomes too difficult and tiring to use, push the lever to the side forward. This means that you&apos;re just using the rear chamber of the pump. You can now pump up to 20psi and beyond! 
Once you have finished pumping, disconnect the hose, remove the handle and place back onto the side of the pump so this doesn&apos;t get lost, switch the exhaust lever back and fold up the feet. // https://youtu.be/WUECGjqMxP8?list=PL417PSCXW7WKQ_x71pLJfhqrGZ-EHMjG_

Titan 2 How To's

Our Multi Pump Adapters have been designed to help with pumping up your board a little faster or if you need an extra hand with pumping. 
Our Multi Pump Adapters come fitted with two non return valves. You will need to remove one of these valves in order for the adapter to work.
Place your palm onto the grey section of the adapter and turn this clockwise to unscrew. If this is a little difficult or fiddly, you can use the end of the hose of the pump, connect it up and twist. This will allow you to release the threads -  you can then unscrew the rest with your hand. Once the grey section has been removed, use your fingers to hold onto the black rubber stalk. Pull this out, (the non return valve) you will also see a very small o ring which you need to remove but keep hold of.
Reassemble by replacing just the grey section of the pump re-screwing this back into the adapter. You&apos;re then good to go with screwing your adapter into your valve and pumping your board using your Titan and electric pump at the same time. https://youtu.be/vPoLRiioraU

Multi-Pump Adapter

The electric pumps we would recommend to use on our boards.

We suggest the Bravo BTP 12 pump - a decent 12 vault. Also, check out the link for our article on the top electric pumps we recommend: https://redpaddleco.com/en-gb/paddle-boarding-know/choosing-electric-pump-inflatables/ 
We supply an adapter with a Schrader valve to help you connect your electric pump. This can be found on our website here. https://red-equipment.co.uk/products/schrader-valve-adaptor

Electric Pumps We Recommend

Any unanswered questions? Get in touch with us here! 
Our standard Customer service opening hours are Monday- Friday 9am-5pm GMT, but we will try and come back to you within 24 hours, even if it is outside of our normal working hours.

If you'd rather give us a quick call, our phone lines are open Monday - Friday, 9 to 5, and we'd be more than happy to hear from you.

Red UK Website

Red UK Help Centre

Pump Information

Pumps

What board is right for me?

How much pressure should I put into my board?

What is MSL Technology?

How durable is a Red Paddle Co board?

How do Red boards compare to hard boards?

How long can I leave a board inflated for?

How long is the warranty on a Red Paddle Co board?

Board FAQ’S

What paddle is right for me?

Paddle FAQ’s

Which Robe Is Right For Me?

Changing FAQ’S

What is the Titan II Pump?

Pump FAQ’s

What bag will suit me best?

Equipment FAQ’s

Our Eco-design Directive - what is it?

Why are some of your products made in China or the Far East?

B - Corp Certified - what does it mean?

Sustainability

When are you open over the Christmas period?

I want to swap my product for a different size / colour - do you offer exchanges?

How long is the returns window for Christmas gifts?

What can I do if there is an issue with my order?

The item I want is out of stock. Do you have any more?

When can I expect a refund from a return?

How long will it take to ship my order?

What is the last date I can order for delivery before Christmas?

Can my gift be wrapped or unbranded?

Why did my order not come with the Insulated Bottle?

Can I get a gift receipt for my order?

I can’t decide on a gift… Can you help?

I received a gift and need to change it - what do I do?

What should I do if I ordered a gift for someone but they would like to change it?

Christmas FAQ’s

When will my order arrive?

Can I amend or cancel my order?

Can I track my order? How?

BFPO Addresses - can I claim VAT back?

My order has not arrived - what do I do?

How can I return an order?

Are there any charges for returns?

What items are returnable?

Do you offer exchanges?

How soon will I receive my refund?

Order Enquiry FAQ's

FAQ's

How To Patch a Leak

Sealing a Leak

Repairing Dust Cap String

Leak Location

Regluing i-Fins

Straightening i-Fins

How To Reglue Cargo Points

How To Store Your Board

How To Rethread Your Bungees

Valve Tightening

Replacement fin-bolts

Board Care Guides

The Bump

Max Rider Weight

Board Pressure

How To Roll Your Board

Packing a Compact

How To Insert RSS Battens

How Long Can It Be Inflated

How To Mount a Camera

How To Insert Click Fins

Board Product Information

Boards

Paddle Storage

Freeing a Stuck Paddle

Water Trapped in Paddle

Camlock Replacement

Paddle Care & Maintenance

Spare / Replacement Parts

Paddle Care Guides

Assembling 3 Piece Paddles

Upgrading Your Paddle

How To Paddle Efficiently

Paddle Product Information

Paddles

Storing Personal Belongings

Deck Bag Clips

Securely Rolling Dry Bags

Securing Cool Bag to Boards

Dry Bag Attachments

How to Use an ATB Sling

Bags & Equipment Product Information

Dry Pouch Cleaning & Tips

Insulated Bottle Washing

Cleaning Kit Bags

Board Bag Maintenance

Cool Bag Maintenance

Zip Care

Bags & Equipment Care Guides

Bags & Equipment

Change Robe Features

Change Robe Sizing Guide

Changing & Clothing Product Information

How To Wash Changing Robe

How To Wash Towelling Robe

Re-waterproofing Robes

Washing Performance Clothes

Changing & Clothing Care Guides

Changing & Clothing

PFD Gas Canisters

PFD Care

Safety Products Care Guides

Winter Paddling

Summer Paddling

Attaching Your Leash

What Leash To Wear

Pre Paddle Check List

How To Use PFD's

Waist Belt Leash How To

Safety Products Information

Safety Products

Maintain Titan I Pump

Titan I Pump Handle

Titan I NRV Replacement

Maintain Titan II Pump

Pressure Gauge Replacement

Pump Care Guides