On occasion, we do see boards with scuffs or leaks which will need repairing. The first point of call is to locate the problem - we highlight how to do this in our "How To Locate A Leak" video which you can find here; https://vimeo.com/706500429/a4bff9e97b
Once you've found the leak and need to apply a patch over it, just watch this video to see how to do so.
You'll need the following;
Something to clean the area with (this comes in the kit we mention, or you can use acetone / nail varnish remover)
A PVC marine adhesive kit
A hairdryer or warm climate
Service kit that comes with the board (this has the repair patch in that matches your board)
Gloves
Masking tape and a pencil
Something to smooth the patch out with (i.e a wooden spoon) and a weight to apply pressure once gluing is complete.
With the kit and instructions in the video above you're ready to repair your board
For the purpose of this video we had the glue and patch on the board to show how to do the repair, but we strongly recommend moving this to a safe area on your work bench / table with a protective layer underneath. https://vimeo.com/706498076
